Earrings are the hardest piece of jewellery to try on virtually because they are small, often hidden by hair, usually seen from an angle, and judged by their size against the whole face. A necklace has the chest to sit on. An earring has an earlobe a centimetre wide, and a drop of a few millimetres changes the whole look.
When we built earring try-on into TryGehna, earrings took more work than any other category. Here is what makes them difficult, what a good result looks like, and how a jeweller can help every earring try-on succeed.
Four reasons earrings are difficult
1. Scale is unforgiving
Customers judge an earring by its length against the jaw and the cheek. A jhumka that hangs to the jawline and one that stops halfway are different pieces. Small errors that would pass unnoticed on a necklace are obvious on an earring, which is why each drop earring is sized by how far it really hangs from the lobe.
2. Hair gets in the way
Most customers wear their hair down, and hair covers the ear. A try-on cannot show an earring on an ear it cannot see. When the ears are hidden, TryGehna asks the customer to pull their hair back rather than guessing where the ear is.
3. Angles change everything
Looking straight at the camera, the ears are seen edge-on. Turned too far, half the face disappears. The best earring photos sit in between: the face towards the camera and the head turned slightly, so at least one ear is clearly visible.
4. Studs and drops behave differently
A stud sits flat on the lobe. A drop hangs, swings and catches the light below it. They need different handling, and treating a chandbali like a stud, or a stud like a drop, gives a result no jeweller would accept.
What a good earring try-on looks like
A good result shows the exact earring, the same stones, metal and design, hanging from the lobe at its real length, sitting naturally against the customer’s hair and skin, with the face itself unchanged. If the customer would not recognise themselves, or would not recognise the earring, the try-on has failed.
How to take a good earring photo
Hair tucked behind at least one ear. Face towards the camera with the head turned slightly. Even light on the face, not a bright window behind. Any earrings the customer is wearing taken out first. The camera held still. If the photo is not suitable, the try-on explains what to change, such as asking the customer to pull their hair back, and the credit is returned.
What the jeweller should measure
For each pair, note one number: the drop length, from where the earring meets the ear to its lowest point. For a stud this is simply its height. Add it when you add the piece, and every try-on shows the earring at its true length. Our true-to-size guide covers the other categories.
Earrings are often the piece a customer adds to a necklace they have already chosen. Getting them right is how one sale becomes two. Book a demo to see your own earrings on screen, or read about mangalsutras and bridal pieces.