Ask a customer what went wrong with a virtual try-on and the answer is rarely the colour of the gold. It is the size. A delicate 9 mm solitaire pendant that appears on screen like a medallion. A pair of studs that looks like chandelier earrings. The design is right, the sparkle is right, and the customer still walks away, because the piece they saw is not the piece they would wear.
Scale is the hardest thing for image-generating AI to get right, and the easiest thing for a customer to notice. This article explains why, how TryGehna keeps every piece at its real size, and what a jeweller needs to measure to make it work.
Why AI makes jewellery too big
Image models are trained to make the subject of a picture clear and attractive. Jewellery is small and detailed, so left to itself a model enlarges it to show the stones. That is the right instinct for an advertisement and the wrong one for a try-on, where the only question the customer is asking is: how will this look on me?
A model also has no idea how big your piece actually is. A product photo of a pendant on a white background carries no scale at all. A 9 mm pendant and a 40 mm pendant can fill the frame identically.
How true-to-size try-on works
Every piece in a TryGehna catalogue carries one real-world measurement, the dimension that decides how large it looks when worn. The try-on then sizes the piece against the wearer’s own body rather than against the photo frame: a pendant against the width of the neck, earrings against the height of the face, a ring against the finger it sits on.
For necklaces and pendants, chain length matters as much as the pendant. A 16-inch chain sits high, near the collarbone. An 18-inch chain sits at or just below it. Longer chains fall onto the chest. Enter the chain length and the try-on places the pendant where it would really rest.
If a piece has no measurement yet, TryGehna estimates one from the photo and checks it against the range that is plausible for that kind of jewellery. An estimate is only a fallback: the moment a jeweller enters the real size, that value wins, and it is never overwritten.
The four measurements to note for every piece
Pendants: the height of the pendant
Measure from the top of the bail to the bottom of the pendant, and note the chain length in inches separately. For a solitaire this may be under 10 mm; enter it exactly as measured.
Earrings: the drop length
Measure from the top of the earring, where it meets the ear, to the lowest point. For a stud this is simply its height.
Rings: the diameter across the finger
Use the ring’s inner diameter, the width of the finger it fits. The size of the head or the band width does not decide how the ring sits.
Bangles and kadas: the inner diameter
The inner diameter tells the try-on how the bangle sits on the wrist.
Most jewellers already have these numbers on the product sheet. Weight and other specifications are worth adding to the piece’s description too: customers ask, and a staff member can answer from the kiosk.
Why it matters at the counter
A customer who sees a piece at its true size trusts what they see, and trust is what turns a try-on into a purchase. It also avoids the most awkward moment in jewellery retail: the customer who chose from a screen and is disappointed when the real piece is brought out.
Want to see your own pieces at their real size? Book a demo and we will set them up for you. For more on accuracy, read Virtual Try-On for Jewellery That Customers Actually Trust.